Fiber Laser Marker
TraceFocus offer Fiber laser marker for various material marking and engraving. We incorporate most advanced ytterbium-doped fiber lasers from well-known fiber laser maker IPG into product TraceMarker. One major benefit of ytterbium-doped fiber lasers is that the near-infrared 1070 nm wavelength emitted is close to the 1064 nm wavelength of neodymium-doped Yttrium aluminum garnet (Nd:YAG) lasers as to make no difference during the actual process of laser marking. This made for a relatively easy replacement of continuous wave Nd:YAG lasers by fiber lasers for most marking applications. Moreover, fiber laser is pumped by laser diodes and no need much optics. Fiber cavity gives high power and quality laser beam. Why for fiber laser can make deep marking up to 1 mm comparing to YAG laser 0.3 mm of same power. Also due to much better beam quality fiber laser can reach up to 0,001 mm precision while YAG laser only ensure 0,01 mm precision. Since fiber laser don’t have much optics which need to replace. TraceMarker based on fiber laser technology could be used without serious service up to 5 year.
Color marking on metal available by Fiber laser marker.
Technical specifications
Device type | Fiber Laser Marker | |
Device name | TraceMarker - 10W TraceMarker - 20W | TraceMarker - 30W |
Fiber Laser of IPG Series | Pulsed, High Energy Ytterbium Fiber Lasers | |
Mode of operation | Pulsed | |
Polarization | random | |
Q-switched operation | ||
Output power adjustment range | 10%-100% | |
Nominal average output power W | 10 W 20 W | 30 W |
Central emission wavelength | 1060-1070 nm | |
Emission Bandwidth (FWHM) | <10 nm | |
Long-term average power instability | <5% | |
Pulse width, (FWHM) | 100 ns | |
Laser switching ON time | 180 μsec | |
Laser switching OFF time | 180 μsec | |
Pulse Repetition Rate* kHz | 20-80 kHz | |
Energy per pulse (PRR = 20 kHz) | 0.95 mJ | |
Typical beam quality, M2 | <1.8 | |
Output fiber delivery length | 3m | |
Operating voltage | 220V | |
Max. Power consumption | 600W |
|
Accessories available: Rotary system for round shape marking and engraving, online flying system, Z working table, XYZ working table. Other configuration of Fiber laser marker available on request.
You can mark and engrave on:
stainless steel marking, carbon steel marking, iron marking, aluminum marking, copper marking, brass marking, anodized and coated materials marking, etc., and non-metallic such as nylon marking, ABS/PVC/PC board marking, hard plastics marking, rubber marking, resin marking, ceramic marking etc. in the industries of electronic and communication products, IC products, electric lines, cable computer components and electric appliance, every kind of precision parts, hardware tools, instrument appliance, aviation and spaceflight appliance, jewelry, garments, instruments, gifts, office devices, brand scutcheon, sanitary ware appliance,
and much more...